The Simtronics DF-TV7–V is a combined ultraviolet / infrared flamedetector offering excellent flame detection whilst maintaining outstanding false alarm immunity. 

The MultiFlame DF-TV7–V is designed to respond to unwanted hydrocarbon fires, whilst maintaining a high degree of false alarm immunity. The DF-TV7-V flame detector uses combined ultraviolet/infrared (UV-2IR) optical technology that provides industry-leading immunity to false alarms based on the two IR channel design.

The device offers a wide range of output options, as standard and is suitable for use in SIL 2 applications. The detector can be configured to communicate with a wide range of fire panels, controllers, and PLCs and offer HART 7 and Syntel (Lonworks) protocols for addressable event monitoring. The devices come standard with a configurable 4-20mA or 0-22mA (PLC) output, two configurable alarm relays, and two detector status LEDs.

All MultiFlame detectors are equipped with a continuous optical lens auto-check to ensure that the optical path is clear and that the detector functions properly. Sensors can be replaced easily in the field without removing any cable glands. Devices are easy to test and configure using a TLU wireless handheld unit that is approved for use in hazardous areas. The TLU can also be used for wireless testing of the optical and output circuits. The TLU can also be used for wireless testing of the optical and output circuits.


技術(shù)參數(shù):

GENERAL
Type	Flame detector
Product	MultiFlame UV/IR
Product code	DF-TV7-XVA0
Manufacturer	Simtronics
FLAME DETECTOR
Type / Principle	Optical flame detection
Technology	Combined ultraviolet and dual infrared flame detector
Fire Types	Hydrocarbon fires
Modularity	Replaceable sensor cartridge
PERFORMANCE
Cone of vision	97° horizontal, 55° vertical at 50% of the axis distance
Response time	1.5 sec with no temporization. Factory setting: delay 2 sec gives 3.5 sec resp. time.Adjustable delay 0 - 20 sec
Detection range:
- n-heptane (1 sq ft fire)	45m (130ft).
- Gasoline (1 sq ft fire)	35 m (115 ft).
ELECTRICAL
Power supply	24V DC, range (18 - 28V DC)
Power consumption	70 mA normal; 155 mA during self test
Cable entry	2x M20, one entry with Exd plug - 2 additional as an option
Junction box	“No-touch” field cabling”, detector replaceable without opening cable glands
Connection	0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires
Analogue output signal	0-20mA, source, max. load impedance 700?.
Fault signalling	Diagnosis signalling in the 2.0 - 3.4mA range
Relays	2 configurable relays for fire and fault
Maintenance interface	Wireless (IR) handheld terminal for configuration, test and diagnosis
ENVIRONMENT
Storage	-40°C to +70°C (-40°F to 158°F)
Operation	-20°C to +60°C (-4°F to 140°F)
Humidity	95% RH (non-condensing)
Ingress	IP66
RFI/EMI	Complies with EN 50130-4
HOUSING
EX Classification	Ex d II C T6 Gb
Material	Epoxy coated aluminium  or Stainless steel (Specify variant)
Weight	Aluminium: 3.3 Kg (7.3 lbs), Stainless steel: 7.4 kg (16.3 lbs)
Dimensions	233L  x 118D x 184H (mm),  8.78L x 4.65D x 7.25H (inches)
APPROVALS
ATEX	Certificate DM LCIE 03 ATEX 6263
IECEx	Certificate DM IECEx LCI09.0018
SIL	Certificate Suitable for use in SIL2 systems
MarED	Certificate 23160/A0 EC + SMS.MED.D/81256/A.0
ACCESSORIES
TLU600	Infrared remote control unit
LT15	Test lamp (EX flame simulation torch)
AS008-450	Sunshade
AS030-A/X	Multi-position angle wall mounting
AS035-A/X	Pivot ball mounting bracket
AS040	Sun visor (long, open)
AS041	Sun visor (long, narrow)

文檔:
 

Product Sheet385.55 KB

Operating Manual1.55 MB

Operating Manual LT15 (Flame Detector Test Lamp)346.03 KB

證書:

 

IECEx Certification170.21 KB

HART Certification47.4 KB

SIL 2 Certificate99.99 KB


應(yīng)用:

• Refineries
• Drilling and Production Platforms
• Fuel Loading Facilites
• Compressor Stations
• LNG/LPG Processing and Storage
• Gas Turbines
• Chemical Plants
• Aircraft Hangers